home > About > Our Service
Wendeng Mould has about 12 years professional experience at
We are familiar with material resin:GPPS, HIPS, ABS (ASA), LDPE, HDPE, PP, PVC, PA6 (PA66, GF filled), PMMA, PC, POM, PET(PBT), CA, PPO(PPS), PEEK, PPSU, PPS and etc.
We are familiar with material steel"Mould-base from DME, Hasco,MingLee or LKM"
Our steel is from LKM, ASSAB, DAIDO, BOHLER, HITACHI, THYSSEN, SARSTAHL, MingLee,SOREL and etc.
Our mould building standard with LKM , HASCO, DME etc.
We are familiar with material resin:GPPS, HIPS, ABS (ASA), LDPE, HDPE, PP, PVC, PA6 (PA66, GF filled), PMMA, PC, POM, PET(PBT), CA, PPO(PPS), PEEK, PPSU, PPS and etc.
We are familiar with material steel"Mould-base from DME, Hasco,MingLee or LKM"
Our steel is from LKM, ASSAB, DAIDO, BOHLER, HITACHI, THYSSEN, SARSTAHL, MingLee,SOREL and etc.
Our mould building standard with LKM , HASCO, DME etc.
We build plastic injection moulds and Thermoset
moulds for:
Rapid-prototype tooling
Low volume soft tooling
High volume production tooling
Over mould and two shot tooling
Hot runner tooling
Automotive Product
38% IT Product
30% Home Appliance
10% Medical Product
7% Airplane Product
5% Industrial Product
5% other product
5%
38% IT Product
30% Home Appliance
10% Medical Product
7% Airplane Product
5% Industrial Product
5% other product
5%
Multi-cavities high quality tooling up to 64 cavities
We are involved in your project from preliminary stage:
Part potential problem analysis: short shot, shrinkage, distortion, flow mark, cell and etc.
Part design, expert suggestion to save cost and optimize the design.
Completed 2D & 3D product design.
Completed 2D & 3D tooling design.
Mould-flow analysis service.
Spare parts production for fragile part.
Plastic injection moulding service.
Economic freight service for your sample, product and mould. (FOB, CIF, DDU, DDP)
We are involved in your project from preliminary stage:
Part potential problem analysis: short shot, shrinkage, distortion, flow mark, cell and etc.
Part design, expert suggestion to save cost and optimize the design.
Completed 2D & 3D product design.
Completed 2D & 3D tooling design.
Mould-flow analysis service.
Spare parts production for fragile part.
Plastic injection moulding service.
Economic freight service for your sample, product and mould. (FOB, CIF, DDU, DDP)